This new app from Prismaver to check windows performances has been deeply transformed to simplify accuracy of measurements.
Check the requirements : iPhone 3GS (+), iPod Touch 3G (+).
Take care, this app gives mistaken figures with other screens than those required (iPad and iPhone simulator).
This app includes a complete user's manual in English and French. Button items and help screens are in four languages as shown on the home page (French, English, Spanish, German).
In this new app, measurements are in mm and fractions of inches directly .
As you know, double glazing is used to improve the energy efficiency in buildings. But today, features of a insulated glazed unit are in a very large range of amount, from approximately 1 W m-2 K-1 (for the best quality), to 3,5 W m-2 K-1 (for the worst) and difficult to distinguish externally.
Prism@ver (which is the name of the available application in French) has created this new software which allows the measurement of glass thickness and insulating air gaps thicknesses by direct reading without removing the glass unit from the window.
It also allows you to locate a low emissivity layer which changes features of the glazing and helps you to visualize stresses which unhide a thermal toughened glass (polarized sun glasses needed).
Why pay for a lazer gauge and a layer detector to get these information about your glazing.
Our purpose is to fuse together a glass thickness gauge, an air gap thickness gauge and a low emissivity layer (low E) detector into an all-in-one application.
This application is today the easiest and the inexpensive way to measure single or double glazed unit thicknesses to evaluate their features.
This software will allow you to improve anywhere and anytime your productivity. It is the perfect tool for any surveyor who needs to quickly and accurately identify and measure glass thicknesses in situ or verify the correct position of the low E layer.
This application is a remarkably simple tool but effective accurate measurement instrument.
With this new app, you can also save all your measurements in a file to check them further.
To run this app, simply place your IPhone as shown in the user's manual against the glass panel and an accurate measurement for each panel of glass or air-gap will be obtained by sliding the tooth wheel.
Measurements can be made from either side of the glass unit without any removing from the window.
It will also help you to locate a low emissivity layer which increases the Ug performance of an insulating glass unit.
Perfect tool for EPC (Energy Performance Certificate) and DEC, DPE, BPE or CPE, this application helps you to measure quite all no marked glazing.
This app is dedicated to professionals and users aware in the technique involved.
The application also includes a device that lets you easily convert mm in fractions of inches.